Milling Machines
Nabertherm LHT 01/17 D
This powerful laboratory muffle furnace is available for temperatures up to 1550 °C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these high-temperature furnaces to all-rounders in the laboratory. Heating times of 40 minutes to 1400 °C can be achieved.
Features
- Low Surface Temperature
- Exhaust Air Opening in Roof
- Precise Temperature Control
- Special heating elements made of molybdenum disilicide offer very good protection against chemical interaction between charge and heating elements
- Dual shell housing made of textured stainless steel sheets with additional fan cooling for low surface temperature
- Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
- Compact design with lift door, opening upwards
- Scope of delivery includes a starter set for charging on one level, additional levels as additional equipment
- Precise temperature control, also in the lower temperature range for drying
- Switchgear with steady control of the heating elements
- Freely usable for sintering blanks of almost all leading manufacturers
- Defined application within the constraints of the operating instructions
Specs
- Tmax 1650 °C
- Furnace chamber with a volume of 1 or 4 liters
- Furnace chamber can be charged with up to two (LHT 01/17D) or three (LHT 03/17D) saggars, 15 or 25 individual crowns per level (depending on model)
- Exhaust air opening in the roof
- Type S thermocouple
- Controller P480 (LHT 01/17 D) or P470 (LHT 03/17 D) with memory for 50 programs
- NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive